Why Choose Autel MaxiIM MaxiIM IM608 Scanner?
This 2021 version key programming IM608 scan tool is the upgraded IM508, with more advanced key programming & IMMO services; wider IMMO vehicle coverage: 95% of models after 2014, over 80 makes worldwide and still growing; OE-level diagnostics based on MS908PRO with ECU coding, active test, all system access, complete 30+ service functions, etc.; further improved hardware: 10.1” Android, 6 Core, 64GB, 15000mAh.
Autel MaxiIM IM608 Highlights:
🚗【Your Key Programing & IMMO Expert】Featuring PIN/CS access (all key lost); key learning & generation; remote learning & activation; IMMO ECU reset, coding, restore, data back-up; XP400 read & write 2000+ chips, components, transponder, MCU, EEPROM, IC Card, with 2 pioneering operation modes of guided & automated Smart Mode and locksmith-level Expert Mode, this competent IMMO Key Programmer will fully meet your needs.
🚗【Expanded Vehicle Coverage】Covering VAG VW, Audi MQB (key learning); Audi IMMO V A4, A5, A6, A7, A8, Q5 (add key); BMW FEM, BDC, CAS3, 3+, CAS2, CAS1 (add key, all key lost); CAS4, CAS4+ (key programming via OBD); Benz 3rd Gen. IMMO (add key, all key lost, key learning); Benz (infrared key read/write) …this Autel immobilizer key programmer gives you almost every key programming & IMMO option a locksmith would need.
🚗【Complete Diagnostic Functions】Having this smart key programmer with ECU coding, active test, all system access, 30+ service functions, etc., can make your locksmith jobs easier: 1. Know car’s health status, avoid potential problems in advance; 2. Make sure system modules working in harmony together; 3. Back up with evidence if anything goes wrong. So your key programing process can be accurate, efficient, and approved, delivering results customers expect.
🚗【All-in-One Key Programmer】The IM608 key programmer can perform dealership-only diagnostics: ①ECU Coding, break pre-programmed limitations to activate & deactivate functions; ②Active Test, test sensors, valves, and solenoids directly to locate trouble area in seconds; ③All System Scan, run in-depth scan to identify all modules faults, clear codes, etc.; with 30+ hot service functions among many others, serving you well within your budget.
🚗【XP400 & J2534 Box】XP400 IMMO key programmer, a dependable key and chip programming tool, allows you to read & write 2000+ most aftermarket keys, fobs, ECU, MCU, EEPROM chips, covering Transponder, MC9S12 Encryption Chip, IC Card, Mercedes Infrared Key, and can detect Remote Frequency. J2534 pass-thru programming box makes comprehensive ECU programming features available.
🚗【Make Key Programming Easier】Guided & Automated Smart Mode for basic Key Learning, with step-by-step guidance. Professional Expert Mode for advanced Key Learning, to get the function segment you need directly. Autel official authorized + dedicated 24/7 service + 1-year product assurance + 12-month software updates. This worry-free key programmer scanner is ideal for locksmiths, technicians, and mechanics.
Autel MaxiIM IM608 Main Features
- Read & Clear Fault Codes | Short description & code provided (can clear faults & warning lights)
- Service Functions | EPB, DPF, SAS, Oil Reset, BMS and TPMS Sensor ID Relearn, etc.
- Access Live Data | Data from the ECU/Modules/sensors displayed in real-time (Oxygen sensor-rich/lean etc)
- Actuation/Component Testing | Actuate (switch on/off) to diagnose functionality (relays, fans, locks etc)
- Coding Functions | Allows you to change vehicle parts that need to be ‘coded’ (Injectors, ABS, starters etc)
- Flashing/Reprogramming | Advanced updating/coding of ECU’s online through a J2534 pass-through flashing device
- Advanced Key Programming | IMMO functions, Transponder read/write/identify, MCU/EEPROM chip read/write
Autel MaxilM IM608 OE-Level Diagnosis For 80+ Vehicle Makes
- All Systems Diagnostics
- AutoVIN / AutoScan
- Read / Erase Codes
- View, Record and Playback Live Data
- View Freeze Frame Data
- Shop and Data Manager Applications
- MaxiFlash JVCI ECU Programmer (Bluetooth/USB cable)
Autel MaxiIM IM608 Advanced IMMO & Key Programming
- Smart Mode:for Guided and Automated Key Learning
- Expert Mode:for Advanced Key Learning
- Read PIN / CS (All Key Lost)
- Generate Key
- Key Learning
- Remote Learning
- Backup / Restore IMMO Data
- IMMO ECU Reset / Adaptation
- IMMO ECU Refresh / Coding
- BENZ 3rd Generation IMMO Add Key, All Key Lost, Key Learning
- BMW FEM / BDC Key Learning and ECU Adaptation
- BMW CAS4/3/2 Key Learning
- VW / AUDI MQB Key Learning, 48 Transponder (96-bit) Add Key, All Key Lost,
- A6 All Key Lost, and More
- XP400 Key & Chip Programmer
- Support PC
- MCU / EEPROM Chips Read / Write
- ECU Read / Write
- MC9S12 Encryption Chip Read / Write
- Key Read / Write
- Mercedes Infrared Key Read / Write
- Remote Frequency Detect
- IC Card Read/Write
XP400 Key & Chip Programmer
- Support PC
- MCU / EEPROM Chips Read / Write
- ECU Read / Write
- MC9S12 Encryption Chip Read / Write
- Key Read / Write
- Mercedes Infrared Key Read / Write
- Remote Frequency Detect
- IC Card Read/Write
Autel MaxiIM IM608 IMMO Vehicle List:
-
Audi: A1, A3, A4, A5, A6, RS4, B6, B7, RS5, RS6, A4 Allroad, A8, S8, Q3, RSQ3, Q5, Q7, R8, TT
-
Seat: Alhambra, Altea, Cordoba, CupraLeon, Exeo, Ibiza, Leon, Mii, Toledo
-
Skoda: Citigo, Fabia India, Fabia, Kamiq, Karoq, Octavia, Rapid India, Rapid, Roomster, Superb, Yeti
-
VW: Amarok, Arteon, Atlas, Beetle, Bora, BoraGli, Caddy, Crafter, EOS, Fox Africa, Fox EU, Fox, GTI, Gol County, Gol(5U), Gol(5W), Golf PLUS, Golf/Rabbit(1K), Golf6 ESTATE, Jetta, Parati, Passat, Phaeton, Polo, Scirocco, Sharan, Suran, T-Roc, Tiguan, Touareg, Touran, Transporter5/Multivan, up, UP!/cross UP!
-
Fiat: 500, 500L, 500X prox, Albea, Boxer, Daily, Doblo, Doblo New, Ducato, Egea, Fiorino, Freemont, Idea, Grande punto, Jumper, Linea, Marea, Nemo, Ottimo, Palio, Palio RST, Panda, Perla, Promaster, Punto, Sinea, Stilo, Viaggio
Autel MaxiIM IM608 Specification:
- Operation System: Android 4.4.2,KitKat
- Processor: Samsung Exynos hex-core Processor(1.3GHz Quad-core ARM Cortex-A7+1.7GHz Dual-core ARM Cortex-A15)
- Memory: 2GB RAM & 64 GB On-board Memory
- Display: 10.1-inch LED capacitive touch screen with 1920*1200 resolution; Wi-Fi:(802.11 a/b/g/n/ac); USB 2.0
- Connectivity: BT v.2.1+EDR; SD Card (Support up to 32GB); HDMI
- Camera(rear): 8.0 Megapixel, AF with Flashlight
- Sensors: Gravity Accelerometer, Ambient Light Sensor (ALS)
- Audio: Microphone; Dual Speakers
- Input/output: 3-Band 3.5mm stereo / standard headset jack
- Power and Battery: Charging via 12V AC/DC power supply with the temperature between 0℃ to 45℃
- Input Voltage: 12V (9-24V)
- Power Consumption: 6.5W
- Operating Temp: 0℃ to 50℃ (32 to 122℉)
- Storage Temp: -20℃ to 60℃ (-4 to 140℉)
- Dimensions(W*H*D): 300mm (11.81") x 220.0mm (8.66") x 50.0mm (1.97")
- Weight NW: 1.42kg (3.13lb.)
- GW: 8.655kg(19.08lb)
- Protocols: ISO9141-2, ISO14230-2, ISO15765-4, K/L-line, Flashing code, SAE-J1850 VPW, SAE-J1850PWN, CAN ISO11898, Highspeed, Middlespeed, Lowspeed and Singlewire CAN, GM, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6SAE J1939, SAE J1708, Fault-Tolerant CAN
IM608'S XP400 & J2534 Connection Instruction:
Autel MaxiIM IM608 Package List:
- 1x Autel MaxiIM IM608 Main Unit
- 1x APC101 USB Cable
- 1x APA101 Signal Cable
- 1x MaxiFlash JVCI
- 1x APB101+ APD101 (EEPROM Adaptor + EEPROM Adapter Shell)
- 1x APA103 (EEPROM Clamp)
- 1x XP400
- 1x APB102 MB IR Cable
- 1x APA104 ECU Clamp
- 1x Main Cable
- 1x APB104 (MCU_FQFP64)
- 1x APA105 (MCU Clamp)
- 1x USB Cable (2m)
- 1x APB105 MCU_FQFP80
- 1x APA106 (MC9S12 Clamp)
- 1x Mini USB Cable
- 1x APB106 (MCU_FQFP144)
- 1x APA107 (Connect Cable)
- 1x AC/DC 12V Adapter
- 1x APB107 (MCU_FQFP144)
- 1x Quick Reference Guide
- 2x Light Fuse 6*30mm
- 1x APB108 (MCU_FQFP176)
- 1x Packing List
- 1x Cigarette Lighter
- 1x APA002 (EEPROM Socket)
- 1x Carrying Case 634*170*404mm
- 1x AAC001